A Quick Overview for Installing a Vehicle Lift

A-Quick-Overview-for-InstallingWhether you purchase a two-poster, four-poster, or mid-rise/scissor lift, there are certain steps that you need to follow to ensure that your lift is properly installed and ready to go when the first repair is waiting for the lift. Here is a quick overview of 5 steps that you should follow throughout the installation process:

Complete Prep Work

When the vehicle drops off your lift, you should be prepared with a forklift or furniture dollies to take it where it needs to go. Before you begin anything, you should thoroughly read the instructions and make sure that you understand everything and have the parts and tools needed to complete the job.

Assemble the Frame

You'll assemble the frame on the ground before you try to lift it. Make sure that everything is square and aligned. Check the bolts and tighten them as necessary, and double check the alignment. Then, you'll need to torque the bolts to the specifications given in the instructions.

Install the Hardware

The first thing that you'll work with is the balancing cables, which keeps the carriage level. Install it with a bolt end, nut, and lock nut. Run it through the pulley system and use a little bit of tension to help keep it in place. You don't want too much tension because it could cause damage to the line.
Install the safety locks, hydraulic systems, and mechanical locking mechanisms. The mechanical locking mechanism also helps ensures your safety and extends the life of the cylinders, hoses, and fittings.
If you're using an auto-lift hydraulic, you should also install one high pressure line to help keep everything in place.

Raise the Lift

As you prepare to raise the lift, you should be aware that it's going to be extremely heavy. You'll need a half a dozen people at least to help get it into position. Once it's there, use a mallet to keep the precise position. Use an SDS Max rotary hammer and masonry bit to make sure everything is locked in place, such as the torque nuts, retaining clips, and mount pads. Then, drill into the concrete and place 3/4-inch wedge anchors.

Add Power

When you're ready to add electricity to your lift, it's wise to call a qualified electrician to come out and help you. Then, you'll need to fill the hydraulic reservoir to help get things moving properly.

If you have any other questions regarding the auto lift installation process, take the time to contact Reliable Hydraulics Inc. to schedule an appointment. We offer installation services, enabling us to come to your shop and help you, so you don't have to worry about whether or not your lift is safe and sturdy enough to hold a vehicle.